HOME

 

We use West System Epoxy Resin, click here to learn more!

To Order Call (479) 359-2429

WIXOM Fairings

Slash 5

 

 

 

Wixom /5 Upper Fairing

$230

 

 

Backside photo showing mounting brackets glassed in.

Slash 5 Lowers, pair

Pair – left and right

$120

 

Mounting hardware not available.  You will need to fabricate your mounting hardware.

Please Note:

We think these were a Wixom product for the /5, but we’re not sure. 

With little or no modification they will work on a Slash 5, etc. as seen in these photos.

If you have any information about the origin of these parts, please let us know.  Thank you.

 

 

Slash 2

 

Ranger MK III - Upper Fairing

$220 

 

 

OEM Weight - 5 lbs. 10 oz.

Our Weight - 3 lbs. 3 oz.

Our mold was made from an original Wixom fairing.

We do not have any mounting brackets available at this time.  You will need to fabricate your own mounting system.   This one would not be difficult to do.

Windscreens are available from Gustafsson Plastics. http://www.bikescreen.com/index.html

 

Ranger MK III - Lower Fairing

$375

 

 

OEM Weight - 10 lbs. 1 oz.

Our Weight - 6 lbs. 13 oz.

Our mold was made from an original Wixom fairing.

We do not have any mounting brackets available at this time.  You will need to fabricate your own mounting system.   This one would not be difficult to do.

 

 

Ranger MK III - Center Section

 

Included with Lower Fairing

 

Available separately $75

 

 

 

 

Slash 2 with Wixom Upper and Lower Fairings.

Photo found on the net, thank you.

 

 

 

PLEASE READ

 

Our fiberglass parts are unfinished.  This means you will need to sand, prime and paint the part.  You will also need to drill any holes necessary to mount the part.  Mounting hardware is not included, only the replacement fiberglass part.  If any hardware is included with the part, it will be stated in the description.

 

NOTE: Occasionally there may be surface imperfections that will need to be sanded or filled and leveled.  Some parts may have flashing that will need to be sanded, filled and leveled.

 

Air bubbles are an inherent problem with hand laid fiberglass.

Occasionally you may expose an air bubble while sanding the surface.  Any air bubbles will need to be filled, sanded and leveled.

 

You can read more on our FIBERGLASS PART INSTRUCTIONS page.

 

Thank You.

 

To Order Call (479) 359-2429

 

HOME

Boxer Cafe / Fiberglass Specialties, 15715 Ashmore Dr., Garfield,  Arkansas 72732

www.boxercafe.com                  info@boxercafe.com                              479-359-2429