Knoscher Fairings

KNOSCHER Full Fairing

Knoscher Full Fairing

Designed for the BMW Slash 5 with a 6” headlight, but adaptable to /6 and /7.

Fairing Price: $300

Windscreen: $130 (clear only, tinted windscreens available from www.bikescreen.com)

Please note, we stock Gustafsson Plastics windscreens. The fairings and the windscreens are not pre-drilled.

Fairing /Headlight Mounting Information: This fairing is typically mounted so the headlight opening is positioned higher and ahead of the stock fork mounted headlight assembly. The stock headlamp is removed from the nacelle and a separate headlight is mounted to the fairing. The nacelle is left in place attached to the forks and a wire harness “extension” is used to connect the headlight.

KNOSCHER Custom Fairing

Knoscher Custom Fairing

Designed for the BMW Slash 6 and 7 with a 7” headlight, but adaptable to the /5.

Fairing Price: $240

Windscreen: $130 (clear only, tinted windscreens available from www.bikescreen.com)

Please note, we stock Gustafsson Plastics windscreens. The fairings and the windscreens are not pre-drilled.

PLEASE READ

Our fiberglass parts are unfinished. This means you will need to sand, prime and paint the part. You will also need to drill any holes necessary to mount the part. Mounting hardware is not included, only the replacement fiberglass part. If any hardware is included with the part, it will be stated in the description.

NOTE: Occasionally there may be surface imperfections that will need to be sanded or filled and leveled. Some parts may have flashing that will need to be sanded, filled and leveled.

Air bubbles are an inherent problem with hand laid fiberglass.

Occasionally you may expose an air bubble while sanding the surface. Any air bubbles will need to be filled, sanded and leveled.

You can read more on our FIBERGLASS PART INSTRUCTIONS page.

Thank You.

To Order Call (479) 359-2429